Steel Structure Exhibition Hall

Steel structure buildings refer to buildings that use steel as the main load-bearing components. They are usually composed of beams, columns, trusses and other components made of steel and steel plates, and together with roofs, floors, walls and other enclosures, they form buildings. Steel structures have the advantages of high strength, light weight, good earthquake resistance and fast construction speed, and are widely used in large factories, venues, super high-rise buildings, bridges and other fields.

Fast construction:

Factory prefabricated beams and columns + on-site bolt assembly mode, construction efficiency increased by more than 60%! Say goodbye to the concrete maintenance cycle, especially suitable for time-sensitive projects such as emergency exhibitions and traveling exhibitions in steel structure exhibition halls.

Low cost:

• 40% savings on foundation cost: lightweight structure significantly reduces foundation requirements
• Labor cost reduced by 50%: a team of 10 people can complete the work of 30 traditional people
• Long-term asset reuse: can be disassembled and reused 5-8 times, with decreasing cost per time

Diverse shapes:

• Achieve 80 meters of column-free space to accommodate giant exhibits
• Curved/special-shaped structures create a sense of technology
• Modular combination meets flexible expansion from 200㎡ to 20,000㎡

On-site management of steel structure exhibition hall installation,
1. Comprehensive safety protection measures must be taken at the installation site to ensure the safety of workers, maintain good ventilation, and effectively isolate external interference.
2. The installation site management personnel must promptly discover the hidden dangers at the installation site and organize the elimination of safety hazards.
3. Safety hazards must be discovered and corrected in time during the installation process, and safety inspections must be organized regularly.
4. Strengthen the storage, maintenance and use management of safety equipment at the installation site to ensure the normal operation of the equipment and ensure site safety.

Safety of installation and operation of steel structure exhibition halls
1. It is strictly forbidden to overturn, hang, throw, or smash steel structure assemblies.
2. Before using important components such as platforms, supports, and floor slabs, load tests must be carried out in accordance with the "Building Structure Load Code" to verify their design and construction quality and ensure that key indicators such as strength meet the design requirements.
3. Workers must take safety measures when going up and down high places, and ensure that the four corners are stable when using scaffolding. It is strictly forbidden to ignore safety measures.
4. Before installation, it is necessary to check whether the bolts, nuts, gaskets, and pads are intact, whether the collision and scratches of the components meet the requirements, whether there are abnormal conditions such as cracks in the assembly parts, and take corresponding protective measures.
During the installation process, the steel structure components must be fixed to ensure the safety of the installation structure and not be affected by external forces. The torque requirements during the installation process must be carried out in accordance with the requirements of the drawings to ensure the stability of the installation structure.

Welding safety of steel structure exhibition halls
1. Before welding, it is necessary to check the integrity of the welding equipment, whether the current, voltage, and quality of the welding rod of the welding machine meet the requirements, and whether the welding supplies are complete; to ensure safety and strictly abide by the safety operating procedures.
2. Adequate washing should be done to remove impurities in the molten pool to ensure welding quality and reduce welding defects; reduce erosion
3. Do a good job in welding quality inspection to ensure welding quality, as well as mechanical properties, deformation characteristics, heat treatment performance and sealing quality;
4. During the welding process, specific temperature setting standards must be followed, such as the temperature curve of reflow soldering and the ideal temperature range of PFA welding rods to ensure welding quality and mechanical properties of the structure.
5. When welding, workers' protective measures should be strengthened, and protective equipment and protective clothing should be worn to ensure the safety of welders.
Safety precautions after installation and construction of steel structure exhibition halls
1. Safety signs should be installed at the construction site to remind workers to pay attention to safety and ensure safety.
2. After the installation is completed, the strength and bearing capacity of the steel structure should be tested to ensure that they meet the requirements and the construction quality is qualified.
3. After the installation is completed, check the installation status to ensure that the bolts, nuts, connectors and other connecting parts are intact, install them according to the requirements of the drawings, and put them into use only after the test is qualified.
After the steel structure is installed, general maintenance work should be done, and safety hazards should be dealt with in a timely manner to ensure safety.

1.Are you a factory or trading company?
we are a professional manufactureing company. We have our own factory.Welcome to visit our factory
2.How to get a quotation?
You can send us your material list to request for a quotation, or you can also simply send us the steel structural drawing and project information.
3.What is the payment term?
TT and L/C are acceptable; But T/T will be more appreciated. 30% deposit and balance before shipment.
4.Why should you buy from us not from other suppliers?
Large storage, with competitive price, fast delivery
5.How do you guarantee the quality of the products?
Strict product quality control, quality makes the future.This is the tenet of our factory. Each product from our factory has strict testing procedures, and must be 100% quality before delivery.
6.What benefit we can get from PNS?
From PNS, you can get full range of advanced system with excellent quality, our know-how and in-time service. They will lead toincreased productivity, labor saving and great cost down on your site as a result.

Hot Tags: steel structure exhibition hall, China steel structure exhibition hall manufacturers, suppliers, factory, Braced Frame Structure