The polyurethane edge bonding rock wool board is a green opportunity for high-quality boards in the context of carbon neutralization, and is favored by high-end steel structure plants. In a carbon neutral environment, there is a continuous stream of customers choosing polyurethane edge bonding composite boards. Therefore, if you want to select a good polyurethane edge bonding rock wool board, it can meet the standards and pass the acceptance, you need to pay attention to the following nine links:
1. The thickness of double-sided color steel plate is generally 0.4mm-0.7mm, with different thickness and quality.
2. High quality manufacturers are selected for color steel plates. The brands of color steel plates include Baosteel, Guanzhou, Xinyu, Jinghua, Taiwan Yehui, etc. Brand color steel plates are also different from ordinary ones. Nanchang Tianxing polyurethane edge sealing rock wool plates can be customized for various brands of color steel plates.
3. The color of color steel plate is usually big wall gray, silver gray, red, blue, white, yellow, green, etc. Other colors and color coatings can be customized.
4. The core material of polyurethane edge sealing rock wool board is high-quality flame retardant rock wool. The thickness of rock wool is divided into: 50MM/75MM/100MM/150MM, with polyurethane side seals on both sides for better water resistance!
5. The decorative surface of polyurethane side sealing wall panel is divided into small ripple (water ripple), flat, large ripple, embossed relief, pressed rib and other finishes!
6. The polyurethane edge bonding composite board connector is concealed, and the concealed nails are firm! Wall panel can be decorated with wide seam or seamless!
7. The installation and typesetting can be horizontal or vertical, depending on the actual design of the steel structure frame. The horizontal arrangement can save more steel!
8. The effective width of the plate is 1m (1000mm), and the length can be determined according to the specific size.
9. The specification of polyurethane edge sealing roof top plate is medium peak, the wave peak height is 42mm, and the wave spacing is 333mm.
