Products Description
The composition of the steel structure workshop mainly includes: load-bearing structure (steel columns, steel beams, steel structure foundation), roof system (steel roof trusses, purlins, tiles), wall system (steel wall or brick wall), connectors and fasteners and other auxiliary structures. These parts together constitute the main structure of the steel structure workshop, which ensures the stability and safety of the workshop.
Precautions for steel structure workshop
Design considerations
1.Gutter & Tie Bar Design:
If there is a gutter, the tie rod should not be designed to fit snugly against the top of the column, otherwise the downspout may not be installed.
The location of gutter downspouts and tie rods and inter-column supports should be fully considered to avoid conflict with them.
2.Horizontal support with basket bolts:
The arrangement of the basket bolt position on the horizontal support should be reasonable, and should not deviate too far from the main beam to facilitate installation.
Consider the placement of the corner braces to avoid conflicts with the horizontal braces.
3.Purlin strand hole design:
Do not consider factors such as "tension edge, compression edge" and other factors on the pull hole of the purlin, and make holes with unequal upper and lower margins to avoid errors during installation.
4.Door and window corner panels:
The design of the corner board of doors and windows should consider the actual situation in the construction to ensure that the plate is located in the appropriate position.
5.Detail Number:
In the case of large-scale projects, the numbering of the detailed drawing should take into account the convenience of production, delivery and installation.
6.Load and other data comprehension:
For the "load and other data" provided by Party A, it is necessary to have an in-depth understanding of its true meaning to ensure that the design meets the actual requirements.
7.High Strength Bolt Position:
The position of high-strength bolts should be reasonable to ensure that there is enough construction space to avoid installation difficulties.
8.The wind-resistant column is connected with the steel beam:
The connection between the wind-resistant column and the steel beam should be connected by spring plate as far as possible to reduce the unevenness of the roof caused by the downward deflection of the beam after installation.
Construction precautions
1.Pre-construction preparation:
Perform pre-construction surveys and surveys to ensure that the foundation of the construction site meets the requirements.
Ensure that construction workers are trained and trained and have adequate skills.
Prepare adequate construction equipment, tools, and materials.
2.Steel quality and selection:
Inspect the quality of steel to ensure that it meets national standards and design requirements.
Select the appropriate steel specification and model according to the design requirements and load calculations.
Pay attention to the anti-corrosion measures of steel.
3.Construction Safety:
Set up adequate protective measures, such as fences, warning signs, etc.
Establish a sense of safety and responsibility, and comply with safety regulations and operating procedures.
Conduct regular safety inspections and training.
4.Construction Quality Control:
Quality control is carried out in strict accordance with the design requirements and construction drawings.
Quality inspection of welded joints.
Deal with quality problems in construction in a timely manner.
5.Fire protection of steel structure:
Fire protection treatment is carried out on the steel structure to improve its fire resistance.
Keep the fire-retardant coating intact.
FAQ
Q: Are you manufacture or trading company?
A: We are factory, welcome to visit our factory.We will provide airport pick-up service
Q: Where can your products be used?
A: Our products can be used in large industrial plants, warehouses, cold storage construction, etc.
Q: Will you provide technical services?
A:Of course, we have 15 technical experts with rich industry experience to serve you 24 hours a day.
Q:What is the MOQ?
A: 400 square meters, we need to ship by sea, 400 square meters can fill a container, maximizing the use of sea freight costs for you.
Q: Which countries have you exported to?
A: We have exported to Peru, New Zealand, Uganda, the United States, New Zealand, Australia, Russia, Mongolia, etc. 60+ countries and regions.
Q: What payment methods do you accept?
A: T/T, L/C, D/P,D/A, O/A etc. Production starts with 30% deposit, full payment is received and shipped.
Q: How long does it take to ship?
A: We use sea transportation and ship from Qingdao Port, which takes about 30 days.
Hot Tags: steel structure workshop, China steel structure workshop manufacturers, suppliers, factory, Braced Frame Structure
